Tuesday, September 17, 2013

Redcat Earthquake 8E to Turnigy Trailblazer and BSD Racing BS808T part number interchange list.

Well if you have owned one of these Trucks for a while you may now they are all brothers and sisters . If not now you know . If you live outside the US HobbyKing and BSD may be a faster and cheaper parts source for you if you live in the US Redcat Racing will Probably be the fasted way to get parts but HobbyKIng will be the cheapest if you buy in bulk. This list has a few upgrade parts scattered throughout and there are a few parts missing here or there I'm Sure.

I have added links to some of the part #s to places where they can be bought .( Not responsible for dead links or links to the wrong product ) verify what your ordering before you order. I have not included part numbers for screws and bearings due to there universal nature or any electronic items..


BDS and Redcat part number all seem to be the same so a additional column was not added for BDS.






Common name Redcat / BDS part # Turnigy part #
/product ID #
PIC'S
Lower Suspension Mount Block, 
Front/Rear ~
BS903-028 292000044
Antenna mount 3PCS ~ BS903-107 292000062
Steering Servo Mount A/B ~ BS803-005
Anti Roll Bar Linkage Set
(Qty 1, 2 are needed to 
mount 1 roll bar) ~
BS903-029 292000045
Center Diff Mount ~ BS803-020 292000086
Center Diff Upper Plate ~ BS803-021 292000087
Wiring Mount ~ BS803-018 292000084
Rear Suspension Arm Pin-Short(?3*34.5mm) ~ BS903-061 292000047
Front/Rear Upper Deck Mount ~ BS803-016 292000083
Front Upper Deck ~ BS803-011
Differential Drive Cup with Pin
 (2*10)
BS903-109 292000063
Differential Gearbox ~ BS903-097 292000059
Diff. Outdrive C Set Screw ~ BS903-083 292000051
Diff Drive Cup B/Pin(2*10) ~ BS903-110 292000064
Suspension Arm Pin-Long
(?3*56mm) 4 PCS ~
BS903-025 292000042
Bumper chassis-Fr ~ BS904-005 292000114
Bumper brace 2PCS ~ BS904-004 292000113
Motor Pinon Gear 12T BS808-007 292000130
Motor pinion 15T NA

292000089

Motor Pinion Gear 15T w/M3 Grub Screw - Turnigy Trailblazer 1/8, XB and XT 1/5
Receiver Case Top and Bottom ~ BS803-015 292000082
Stub Axle w/pin ~ BS808-001 292000115
Shock Tower ~ BS903-005 292000034
Bumper Chassis, Rear ~ BS904-006 292000115
Front Suspension Arm Pin-Short(?3*37.5mm) 4PCS ~ BS903-024 292000041
Front Chassis ~ BS903-026 292000043
Fr/Rr body post ~ BS801-008 292000112
Double Way Ball end 6 PCS ~ BS903-094 292000057
Upper Suspension Arm Mount (F/R) BS903-011 292000038
Diff. Gearbox Bulkhead-Upper/Lower ~ BS903-098 292000060
Front Lower Suspension Arm (L/R) ~ BS903-018 292000099
Hub Rear Carrier ~ BS903-058 292000046
Side Guard Left/Right ~ BS803-002 292000120
Front Center Diff Drive Shaft (1pcs) BS803-012
Center Diff Drive Shaft Rear 1pcs ~ BS803-013
SPUR GEAR (49T) ~ BS808-005 292000071
Wheel Hex with Pin 2*10 4PCS ~ BS808-002 292000126
Suspension Arm Mount Block 2 PCS ~ BS903-010 292000037
Left/Right Battery Strap 2pcs ~ BS803-009 292000078
Left Battery Tray ~ BS803-007 292000076
Right Battery Tray ~l BS803-008 292000077
Steering Linkage Set 2 SETS ~ BS903-030
Rear Lower Suspension Arms (L/R) BS903-059 292000102
Rear anti-roll bar set ~ BS905-009
Upper Suspension Arm Set ~ BS903-008 292000097
Front Suspension Mount ~ MPO-06
Rear Front Suspension ~ MPO-07
Diff Ring gear and Spider Gears
 1 Set ~
BS803-027 292000122
Drive Shaft Set (4*87.5mm) 2PCS ~ BS903-019
Aluminum Motor Mount ~ BS803-022 292000088
Bumper 2 PCS ~ BS904-003
Shock Absorber Unit(Plastic),2 PCS BS903-003-b
Servo Saver and Bell Crank 
with Aluminum Ackerman ~
BS803-010 292000079
Center Differential  ~ BS808-006 292000129
Steel Spur Gear 49T ~ MPO-019
Front/Rear Complete Diff 1 Unit ~ BS803-026
Front/Rear Complete Diff 1 Unit Hardened ~ BS803-026A
Aluminum Front/Rear Upper Deck ~ BS803-017 292000121
Front/Rear Complete Diff and 
Bulk Head 1 Unit hardened ~
BS803-025A 292000090
Steering Linkage ~ MPO-11
Center Differential Unit ~ BS808-004 292000128
Cast Aluminum Steering Knuckle L/R BS502-021 292000065
6065 Blue Aluminum Chassis ~ BS803-001 292000119
Shock Stay Mount ~ MPO-05
Steering Knuckle Set, Aluminum Upgrade Qty 2 ~ MPO-03
Rear Hub Set ~ MPO-04
C Hub Assembly, Aluminum Upgrade ~ MPO-02

Sunday, September 15, 2013

Redcat Racing Mirage Info just incase your looking for mods , upgrades , or just some other info.

Well after studying up on this buggy I decided I should post some parts that are specifically available for the Mirage to  improve its durability and speed . Now theres lots of parts out there that will fit but I'm sticking with the basics.

If you have a early model I would recommend checking the Redcat racing parts section and update some the parts to V2 spec as they they did revise a few parts . The parts have new part #'s or have had leters added to the end of the original part # but they all say V2 in the description . Redcat Mirage V2 parts

Also If you have a new model it appears Redcat has replaced the ESC that was originally used with a ESC that is now only 3S capable and looks similar to a Hobby Wing esc but with different labels. ESC pictured below.

Similar to new ESC
ESC originally used

So a new 4s capable esc may be a good upgrade for the speed freaks out there as this buggy is reported to run at around 45 mph on 3S lipos and 4S lipos push it to nearly 60 mph.

Ok now for the nitty gritty .

TBR or T Bone Racing has come out with some front and rear bumpers and even side plates for the wing and If you play hard I really think you should check them out . http://t-bone-racing.net/Mirage-Pro-c502/




Wednesday, September 11, 2013

Helion Criterion available at Hobby Town USA 30+ mph RTR

Well I kept seeing ads for this buggy and decided to have a look see at what this buggy is all about . 

From what can be seen from the pictures available at this time Helion didn't really set out to break the mold but this isn't a bad thing as the basic buggy design is very reliable and with the addition of a substantial amount of plastic added to the most easily damaged areas such as the front shock tower I think this looks like a good basher for the person who may think about racing .

The first thing that intrigued me was the claim of  class leading top speeds . Upon further investigation I can say it probably does have the hottest sealed can brushed motor I have ever heard of since it is a 12 turn 540 motor instead of the  12 turn 550 motor some are using these days. What this means is more RPM for your money . As of this moment the next nastiest sealed can 540's are the 15 turn motors from HPI,Arrma, and dynamite so this should be a big kick in the pant's compared to the other offerings . 



The buggy also comes with front and rear 12mm wheel hexes The specs list the wheels as Team Associated and Kyosho compatible now thats a smart move.






I'm also glad that they include ball bearing everywhere including the steering bellcrank . I can't decide if I like the Idea of the plastic slider shafts but you never know .Hopefully the diff gears are good and strong.

I like that they designed the battery strap to accommodate a 7 cell hump pack and with waterproof electronics this new buggy is keeping up with the big names as most of them have went waterproof already . 
All in all I think Helion has made shopping for your next. budget buggy a bit more interesting but I do think the price ( $189.99 ) is a bit much for what you're getting . To be blunt I think there is someone out there this buggy is perfect for but my first thought after seeing the price was that a Traxxas bandit is only  $204.99 from Hobby town. I don't really think the price is low enough for what you get in my opinion this should be priced at $150 or below to compete with the ECX Boost and undercut the Arrma ADX-10 which runs around $160. 

If I was real picky I would point out that the Redcat Racing Twister XB in brushed form can normally be bought for $119.99 with free shipping and the brushless version runs about $185.99 with free shipping but they are in a slightly different category.