Sunday, September 15, 2013

Redcat Racing Mirage Info just incase your looking for mods , upgrades , or just some other info.

Well after studying up on this buggy I decided I should post some parts that are specifically available for the Mirage to  improve its durability and speed . Now theres lots of parts out there that will fit but I'm sticking with the basics.

If you have a early model I would recommend checking the Redcat racing parts section and update some the parts to V2 spec as they they did revise a few parts . The parts have new part #'s or have had leters added to the end of the original part # but they all say V2 in the description . Redcat Mirage V2 parts

Also If you have a new model it appears Redcat has replaced the ESC that was originally used with a ESC that is now only 3S capable and looks similar to a Hobby Wing esc but with different labels. ESC pictured below.

Similar to new ESC
ESC originally used

So a new 4s capable esc may be a good upgrade for the speed freaks out there as this buggy is reported to run at around 45 mph on 3S lipos and 4S lipos push it to nearly 60 mph.

Ok now for the nitty gritty .

TBR or T Bone Racing has come out with some front and rear bumpers and even side plates for the wing and If you play hard I really think you should check them out . http://t-bone-racing.net/Mirage-Pro-c502/




No comments:

Post a Comment