Parallel charging Board for 6 packs 2~6S (T Connector) (USA Warehouse)

Well I got this from the US Warehouse with my last order . I planned on using this to charge my smaller packs for my 1/16th scale and 1/18th scale cars but I have found that this also handy for slow charging my larger packs in bulk . So far I Have no complaints especially when I could have paid a lot more for a very similar product and since I won't be using this to much I think why spend money I don't have.

For those that don't understand the benefits of using this device I will attempt to explain .
If you have a charger that has the ability to charge at a higher and rate then your batteries are recommended to be charged at you are wasting precious time . My personal example would be my GT power X-charger C6 It is rated to charge at up to 6.0 amps when charging a 2s lipo battery pack  rated at 1500mah and a 1c charge rate .  What happens is that this board connects the batteries in parallel to each other and then connects to the charger . The charger only sees the batteries as one big battery when connected like this and when the batteries are connected in parallel the charge rate is divided among them . So if I connect 4 batteries rated at 1500mah and charge them at a 1C  rate then I will be using the full potential of my battery charger .

Now as my public service announcement :

All Batteries That You Plan To Charge Must Be Of The Same Capacity at the minimum but personally I will Only be charging packs of the same rating from the same manufacturer .  

Manufacturer's description :

Charge SIX (2~6S) lipo packs with same capacity & cell count simultaneously with this parallel charging board.

That means you can charge 6 3S 2200mAh or more at the same time with a standard charger!


Spec.Cell: 2~6SVoltage: 0~22.2VDCMax current: 30ABattery: 6 packs same capacity & cell countConnector: T Connector/Jst-xh

PRODUCT ID: 9171000064

Where to buy :
Parallel charging Board for 6 packs 2~6S (T Connector) (USA Warehouse)