Well the first views of this truck where on the Hobbyking facebook page October 18, 2012 and at the time everyone was focusing on the soon to be named SkullCrusher 2wd monster truck that Hobbyking had been teasing everyone with .
As can be seen in the photo's they had rigged it up with lots of cameras to use it as a chase car for some of their online video's.
Then all went quiet on this Truck till 6/1/13-6/2/13 and Hobbyking unveiled it at RCX and a website had sprouted up with no announcement http://www.basher.com/ and then a video appeared. On YouTube for RCX and then another just featuring the Monster truck after that another video just teasing us with a frankentruck version .
Now after paying attention on the last video it is stated that the truck will have a $250 dollar price point and that was a big deal as everything up to that point was just speculation . Somewhere during all this the Hobbyking TrailBlazer 1/8th scale MT disappeared from the US warehouse and I suspect others to make way for this monster but as of now it is still a no show .
But here are the pic's we have to go by for now and the spec's as currently published.
POWER SYSTEM
Powerful 2075KV Brushless Inrunner Motor
80A Brushless ESC w/ Reverse
4S Lipo Battery w/ HXT 4mm Connector (Required)
15Kg Heavy Duty Steering Servo
80A Brushless ESC w/ Reverse
4S Lipo Battery w/ HXT 4mm Connector (Required)
15Kg Heavy Duty Steering Servo
DRIVETRAIN
Full time 4WD
Steel front, center and rear sealed differentials
Hardened steel pinion gear
Heavy duty drive shafts
Hardened metal drive cups
Full ball bearings
CHASSIS
3.5mm alloy chassis plate
Adjustable screw shock absorbers
Oil filled, big bore shock absorbers
3.5mm shock shaft
Adjustable toe-in and toe-out
Adjustable camber and castor
Independant wishbone suspension
Officially licensed Nitro Circus engraving
Adjustable screw shock absorbers
Oil filled, big bore shock absorbers
3.5mm shock shaft
Adjustable toe-in and toe-out
Adjustable camber and castor
Independant wishbone suspension
Officially licensed Nitro Circus engraving
MEASUREMENTS
Length: 577mm
Width: 480mm
Height: 314mm (To top of cab)
Ground clearance: 110mm (Adjustable)
Battery area: 138mm x 46mm x 25
Width: 480mm
Height: 314mm (To top of cab)
Ground clearance: 110mm (Adjustable)
Battery area: 138mm x 46mm x 25
No comments:
Post a Comment