Oh yeah the body Is pretty much junk now to .
Pages of interest
- main
- ZD Racing Zmt-10 / Turnigy Stadium King 2wd page
- The Redcat Racing Page , broke parts list ETC.
- ZD Racing ZMR-16 / ZMR-16R /ZMB-16 / ZMC-16 / ZMC-16C (1:16 Scale)
- Products I have tried
- Low cost crawler
- Phoenix arms HP22 HP25 .22lr .25 acp info
- Clerke first 1st revolver .32 S&W .22LR Terrier o...
- Cetme C308 HK-91
- 3d printing
Thursday, December 6, 2012
damage
Pic's of all the damage I have done to this truck This includes 2 packs or 17 minutes of ruff jumping and harsh landings + running in to a telephone pole and then 3 battery packs or ruffly 30 minutes of running it in to a fence post.
Labels:
stadium king truggy 2wd,
Turnigy,
ZD racing,
ZMT-10
Top ten things you should do after buying a Zmt-10 or 2wd Turnigy stadium king .
For the most part most of this applies to all ready to run or RTR Cars.
- Break in your motor by using the water break in method.
- Replace the brass pinion with a steel or aluminum pinion . (brass wears very fast )
- Experiment with different pinion gear tooth counts .
- Remove the play in the steering system .( look at my other post)
- Drill holes in rims to allow air to escape .
- Replace bushings with bearings
- Shim transmission gears and shafts to remove play.
- Shim differential ( look at other post)
- Replace broken parts with Traxxas or aftermarket parts for the Traxxas rustler.
- When ready upgrade to more powerful brushed motor or a mild brushless system.
Labels:
stadium king truggy 2wd,
Turnigy,
ZD racing,
ZMT-10
Sunday, December 2, 2012
One of my new favorite web pages I have found . It maps hobby kings product stock and can help you decide if a product is going to sell out or if you can wait a little while longer before you place a order . I personally want to thank the creator. http://www.hobbyking-watch.com/
Thursday, November 29, 2012
Cheap speed 3 ZMT_10 project
Well I bought The ZMT-10 mostly to continue my cheap speed post and to show how fast you can make a R.C. on a budget. so we already have a baseline of out of the box performance . At 17 MPH after installing bearing's. After a couple more packs the bearing', motor and drive gears should be broke in more and reduce the drivtrain's friction and allow additional top speed and I will take a new baseline test to see if there is a measurable change . then expect to to see the power levels to start raising
Labels:
stadium king truggy 2wd,
Turnigy,
ZD racing,
ZMT-10
Subscribe to:
Posts (Atom)